Are you planning to work with drywall? Preparing for this kind of project requires more than just selecting the right supplies and number of sheets you require. There are a variety of things to consider, including whether or not you want to work with a drywall company. If the project is large, and you have no DIY experience, you probably will need some assistance. If it’s a repair project, you might be able to tackle it by yourself.
Regardless of what you plan to do, it’s important that you prepare the area and have the right drywall supplies on hand. Here are some tips to help you get started.
- Building regulations should always be considered – especially if you want to apply new drywall to the wall frames. All interior wall systems, including plumbing, electrical, and mechanical should be checked. Make sure you’re complying with all of your local building codes.
- Make all of the necessary safety precautions when preparing a room for drywall repair or replacement. Space must be created for all of the materials and tools required. Properly store and stack all of the tools at the end of each stage. Also, wear safety glasses and protective masks whenever you are dealing with a lot of dust. There should be proper ventilation at the work site.
- Have all of the appropriate tools on hand. Successful drywalling requires the use of both basic tools and drywall-specific tools. You’ll need sanding tools, taping knives, nails or screws, mixing tools, T-square, tape measure, framing square, and chalk-line. if you need to do repair work, a drywall patch kit might contain everything you need.
- Joint tape and compound are essential for many drywall jobs. The tape is required for reinforcing the seams between panels. It can also be used to repair cracks in the walls. Fiberglass mesh tape is now the preference of many experts over paper tape. Joint compound is available pre-mixed and powdered. Fast-drying, coarse compound is typically used after the first coat, and thinner compounds are used on the top coat. Another option is all-purpose joint compound, which is somewhere in between the taper and topper compounds. This is a good option for small areas.
- While tape and joint compound are used to finish the inside corners of drywall, corner beads are used to cover outside corners. They are required for creating sharp 90-degree angles, as well as for protecting the corner surface of the wall. There are a variety of types, including those that can be screwed or nailed in place. A crimper must be used if you choose metal beads over plastic ones. No matter which type you choose, try to install the beads in one piece to create a seamless finish.
- Make sure you’re using the right kind of knives. You can use a basic utility knife to make cuts through the face of the drywall sheet. Depending on the stage of the project, you may select a taping knife that is anywhere from 1 to six inches in width to spread the joint compound and embed tape along a seam.
This is a basic overview to help you prepare for a drywall project. You now have some idea of what kind of drywall supplies you’ll need for the job.