Features of an Impenetrable Building Envelope
With the modern trends, building envelopes are becoming more and more sophisticated as homeowners want the best look and comfort they can get. Therefore it is important to know what makes the building envelopes, and what their significance in that regard is.
A well-detailed building envelope will ensure that you have a comfortable home interior, regardless of what the outdoor environment is. The following are what a building envelope entails and their significance;
Foundation wall and floor system
Leaking, wet or even cold basements can be as a result of a poorly designed or installed foundation wall system. Sealing off the foundation walls is just as critical as any other type of plumbing or drainage in your home. Some of the remedies for this include:
- Membrane: For water infiltration, membranes have the capacity to protect your basement from water infiltration for a long time.
- Sheath foam: You can use sheath foam for insulation both on the walls and floor, which ensures thermal problems are solved. The installation of a sheath foam is pretty straightforward.
- Spray foam: It helps in providing a heat barrier and also is helpful in situations like larger gaps. The spray foam also provides better insulation.
Above-grade wall system features
Above grade wall system brings energy, strength and superiority to your building applications. The concrete wall panels are well designed and modified for the use of above grade. The wall panels can be stuck together with foundation panels that can be used to create multiple storeys of a structure. Thus a good wall considers the following factors:
- Studs. In the case of storms or cold weather, you should consider having a stud design that will not interfere with the thermal system you have in place.
- Tape. It is one of the simplest yet essential tools. You have to make sure you seal all the joints properly using tape. When not done properly, it might create an opportunity for air infiltration into the home.
- Insulation. When considering what drywall supplies to get from a drywall supplier, this should also go with the method of insulation one should apply. Whether it’s using sheath foam or fiberglass batting on your walls, remember that insulation is one of the factors that determines your thermal conditions.
A tight and efficient building envelope should ensure that there's no air penetration. Any penetration of air means failure of the building envelope. However, some three building components can pass through the envelope.
- Doors: Exteriors doors can be a penetrating point for building components; however, they should always have insulation to prevent thermal interference.
- Windows: With the advanced technology, comes multi-pane, insulated windows that can be fundamental in creating space between panes and coatings that attract heat to the structure.
- Utility inlet and outlet: When not in use, one should cover these systems to prevent the inflow or outflow of air, this might lead to thermal interference.
Roof sealing system
A good roof keeps water out of the house, in any weather condition. For this reason, a good roof sealing system is in order. Water leakage or moisture from the building’s roof can cause serious health issues.
- Roofing materials: Not only should the materials used be of high-quality, but also the roof design should be top notch and durable.
- Extra protection in areas prone to problems: In areas where water tends to leak you should pay extra attention and seal it air tight.
For you to have an efficient and state-of-the-art building envelope, you should make sure that the features mentioned above are well-installed and designed to enable you to have a comfortable experience in your home.