Drywall Tools

Drywall Supplies - The Lumber Guys

When a drywall company installs drywall in your home, they come with all of the supplies needed to complete the job, but when you want to do the job yourself, there are some basic drywall supplies you need to get the job done. Below, we will go over some of the basic supplies that you should stock up on before you start your new drywall installation project.

Tape Measure

You cannot perform a drywall job without a tape measure on your belt. This is one of the most essential tools and it will help you take accurate measurements. We cannot stress how important it is to make sure that you do take accurate measurements, otherwise, your pieces of drywall may be too small or too large.

Razor Knife

A razor knife is another one of the many drywall supplies you will need to have on hand. The knife will allow you to score the drywall when you need to make a cut and the knife will also cut through the drywall when you need to make cuts.

Razor knives are affordable and you can use them for other utility purposes, which make them a good tool to have. When you do grab a razor knife, make sure you also purchase additional blades for it as you will wear down the blades when cutting drywall.

Putty Knife and Pan

When you perform a drywall job in your home, you will need to have an assortment of putty knives and a putty pan. The pan will come in handy when you need to pour putty into it and take it up onto a ladder with you.

When it comes to your putty knives, you should at minimum have one on hand, but it helps to have an array of sizes at your disposal because some areas may require more putty than others. We recommend that you have a six-inch, ten-inch, and 12-inch putty knife on hand.

Drywall Square

You should purchase a drywall square and have it on hand at all times. This tool is used to help you accurately measure and make cuts where necessary. The square also provides you with a straight base so that you can make accurate lines when you need to draw on the piece of drywall you plan to cut.

Sanding Blocks

There will come a point in time where you need to sand down the compound that you place on the drywall and to do this, you will need sanding blocks. Make sure that you have a couple of them on hand to complete the job. One tip for success when it comes to sanding is to choose a fine grit sandpaper.

If you are planning on replacing your drywall or installing new drywall, you will need to make sure you have the right drywall supplies on hand. The above list is a good start and many drywall companies keep these supplies on site at all times.

If you have a question about any of the supplies or tools you need, contact your local drywall company today for guidance.

 

 

Brands We Work With

CGC
CertainTeed
Client
Client
Client
Client
Client
Client
Client
Client
Client
Client