Tips for Painting Over Drywall
When the drywall is damaged and there are nicks, scratches or small holes on it, there’s a lot you can do to repair it. You may decide to repair a section of the drywall with joint compound or a quick-drying spackle. Whatever building materials Toronto you choose to handle the repairs, there’s a high chance that the area will still look different from the rest of the wall. It’s all about using the right technique. Painting the drywall helps to ensure the area blends with the surrounding wall. Taking the right steps before and during painting will ensure you have a smooth finish. Below are a few tips that may help you get started when painting over drywall repairs.
Perform the right repairs
The kind of building supply Toronto you will need to apply on the drywall to fix the holes or any depressions will depend on different things. For a start, you’ll have to look at the size of the hole or depression that needs to be covered. If you need to fill larger areas, you are better off using a joint compound. Apply spackle using a putty knife if the area that needs repairs is small.
Proper sanding is key
Next, make sure you sand the repaired area well. This will greatly affect the final look of the repaired area after it is painted. You can use a fine-mesh drywall sanding sheet that will give you a great finish. Just make sure you use it after the repair material you applied is completely dry. To know if you’ve done a good job at sanding, feel the area to make sure it is smooth and blends nicely with the rest of the surrounding wall.
Apply a primer
Priming is also a key part of drywall repair that will ultimately affect your painting job. There are lots of options in the market when it comes to drywall primer. The primer is designed to seal the repair material, whether joint compound or spackle and make sure it is well prepared for painting. You can apply primer using a paintbrush or a roller. This will depend on the size of the area to be repaired. Remember that if you forget to apply a primer, the area that you just repaired will quickly soak up the coats of paint you later apply. The primer helps to prepare the surface for painting.
Paint the drywall correctly
Painting drywall isn’t a difficult task. It will help if you have the right tools. You can choose to use either a paintbrush or roller depending on the size of the area and your personal preference. If you opt for a roller, make sure it has the right “nap”. This is basically the thickness of its fibers on the cover. If you want to get a very pronounced wall texture, then a roller that has a thick nap of say ¾ inch is the most ideal. Make sure you gather all the construction supplies Toronto you may need for this job. This includes the putty knife, drywall sanding sheet, sanding block, joint compound or spackle and roller cover.